Product Highlights

The 4×5.65 Filter Cartridge is a hard case designed to hold one 4×5.65 cinema filter. Protect your valuable cinema filter investment in a way that is far superior to existing industry standard soft filter pouches. This case will protect your filters and allow for ease of use that is far superior to standard filter pouches. This case features an angled lid allowing for the edges of the filter to be exposed when open in order to pull the filter out without touching the front or back. Internal rails keep the filter from touching the flat glass surfaces with rail thickness that does not exceed a normal matte box tray frame. Each Cartridge has raised surfaces that facilitate stacking in a drawer or camera case. They are held together with weak alignment magnets. These magnets allow the Cartridge to line up effortlessly when stacking in your other cases. The projections on the side of the case hold the alignment magnets but also create place for a rubber band or gaffers tape to be applied securely without slipping if you wish to secure multiple cases stacked outside your camera case. We do not put strong magnets in the Filter Cartridge to avoid accidental separation if carrying multiple cases in a stack outside your camera case. Each case has a 10mm flat surface on the top, bottom and in between the stacking grooves to allow for labels either preprinted or using tape. Made from injection molded durable PA66 poly compound, this case will stand up to daily professional use able to withstand temperatures over 200C with insulating properties to protect the glass and maximum impact resistance. The case is a 4 part assembly that opens with screws if the inside needs to be cleaned or serviced. Weighing in at 115g (4oz), this filter case will not add unnecessary weight while bringing a high level of protection. The integrated latch mechanism on the top lid is designed to withstand years of daily use.
Step up from traditional filter pouches to provide peace of mind and superior ease of use.